Factory Wrapped
Full factory shrink wrap, blue protective metal film, and foam edge padding remain undisturbed on the original pallets inside the Mill City crates, verified visually at delivery.
Factory Wrapped. Never Fired. One Unit Available.
Equipment Overview
This unit is a final production year 2025 Mill City MCR-10 (MCR-10 Legacy, 2018–2025) 10 kg commercial propane coffee roaster packed March 27, 2025. Built for commercial production roasting, it ships complete in its three original Mill City timber crates with factory install and Layout S venting kits included.
Offered for sale on behalf of Church of The Lamb in Penn Laird, Virginia at $32,000 USD with free insured LTL freight up to 750 miles, this unit is priced $15,000 (~32%) below Mill City Roasters’ published $47,000 list price for a new M-Series 10 kg while remaining factory wrapped with zero roast hours. Two crates were briefly opened at delivery solely for receiving visual inspection (without moving or unbolting the wrapped cargo) and re-secured closed with screws.
Direct comparison against Mill City Roasters’ published 10 kg pricing
| Option | Condition & Availability | Price | Difference vs. This Unit |
|---|---|---|---|
| This Unit — 2025 MCR-10 Legacy (MCR-10-BKBS) | Factory crated, never fired · Immediate release | $32,000 | Includes free insured LTL freight (up to 750 mi) |
| New Mill City M-Series 10 kg | New current-generation model (millcityroasters.com) | $47,000 | +$15,000 (+46.9% above this unit’s price) |
Visual Due Diligence
Twenty-eight inspection photographs organized across Crate 1, Crate 2, and Crate 3, including visual receiving proof inside Crate 1. Select any frame to open high-resolution lightbox inspection.
Showing 28 of 28 inspection photos
Timber crate exterior, factory placards, packing slip (packed 27 Mar 2025), untripped ShockWatch monitor, and receiving interior check
Timber crate exterior, COOL BLACK/BRUSHED placard, packing slip (packed 27 Mar 2025), and handling labels
Timber crate exterior, CHAFF BLACK/BRUSHED placard, packing slip (packed 27 Mar 2025), and handling labels
Original Bill of Lading · Freight Table
Only directly verifiable data is listed below: handling units, crate dimensions, weights, and NMFC freight class transcribed from the factory Bill of Lading (tracking, account, and address lines redacted), alongside packing-slip SKUs photographed on the crates. Unverified third-party estimates have been omitted.
| 1 | CRT | 1 | — | Contains: 1 Pieces MCR 10 — 1 of 3 Roaster Body Factory placard: MCR-10 BODY BLACK/BRUSHED (SKU MCR-10-BKBS) | 58 × 45 × 78 in | 1,369.0 lb | 118060-00 | 100 | 117.8 cu ft |
|---|---|---|---|---|---|---|---|---|---|
| 1 | CRT | 1 | — | Contains: 1 Pieces MCR 10 — 2 of 3 Cooling Tray Factory placard: MCR-10 COOL BLACK/BRUSHED (3-batch capacity) | 38 × 36 × 54 in | 403.0 lb | 118060-00 | 100 | 42.8 cu ft |
| 1 | CRT | 1 | — | Contains: 1 Pieces MCR 10 — 3 of 3 Chaff Collector Factory placard: MCR-10 CHAFF BLACK/BRUSHED & hardware | 34 × 34 × 70 in | 278.0 lb | 118060-00 | 100 | 46.8 cu ft |
| 3 | 3 CRT | 3 | — | TOTAL SHIPMENT (3 HANDLING UNITS) | Max H: 78 in | 2,050.0 lb | 118060-00 | 100 | 207.3 cu ft |
BOL Handling Unit 1 of 3 · NMFC 118060-00 · Class 100
Original timber shipping crate housing the primary 10 kg roaster body in Black / Brushed Stainless (verified by the external MCR-10 BODY BLACK/BRUSHED placard, March 27, 2025 packing slip, and delivery receiving inspection photo).
MCR-10 BODY BLACK/BRUSHED (finish SKU MCR-10-BKBS)Proportional diagram rendered strictly from verified BOL exterior crate dimensions and factory packing-slip designations. Mill City Roasters does not publicly host downloadable CAD drawings or uncrated sub-component blueprints; serial-matched cut sheets may be requested directly from Mill City technical support.
Technical Data
Verified specifications confirmed directly from factory crate placards, the March 27, 2025 packing slip, the original carrier BOL, and Mill City Roasters’ published documentation.
| Model & Production Series | 2025 Mill City MCR-10 Legacy (2018–2025 Legacy series; packing slip SKU MCR-10-BKBS) |
|---|---|
| Finish & Factory Pack Date | Black / Brushed Stainless · Packed March 27, 2025 |
| Nominal Batch Size | 10 kg (~22 lb nominal green capacity) |
| Cooling Tray Specification | Holds up to 3 full batches; cools 2nd-crack roasts in under 4 minutes (Mill City published spec) |
| Published Roaster Footprint | 3′-9″ × 7′-5″ assembled footprint (published on millcityroasters.com; buyer to verify exact room clearances with serial-matched cut sheet) |
| Fuel Configuration | Propane (LP) configured per packing slip (GRC-10-LP Install Kit included) |
| Utility Hookup Requirements | Buyer’s licensed gas/electrical/HVAC contractor must confirm exact BTU, gas line sizing, electrical service, and exhaust specs against Mill City’s serial-matched manual prior to rough-in |
| Roast Profiling Software | RoastPATH (Mill City native logging & Roast Replay) · Cropster documented support |
| Crated Shipping Package (BOL) | 3 factory crates (1-3, 2-3, 3-3) · 2,050.0 lb total (1,369.0 / 403.0 / 278.0 lb) · NMFC 118060-00 · Class 100 |
| Included Kits & Venting (Packing Slip) | Install Kit GRC-10-LP (Install Base Kit) · Quick Connect Kit VK-10-S (Layout S) · Kit bag A620 · Kit box S620 · Precut Pipe 4QF × 42 & 5QF × 34 Galv |
| Warranty & Factory Support | Standard factory warranty applies only to the original purchaser and does not transfer; Mill City Roasters sells Legacy replacement parts, venting kits, and paid hourly Priority Support |
| Shipping Origin & Freight | Penn Laird, VA · Free insured LTL freight up to 750 miles |
| Serial Number | Verified on rear plate & original paperwork; shared privately with serious buyers |
Inspection & Provenance
Full physical status disclosure so commercial buyers can evaluate the machine accurately prior to travel or freight scheduling.
Full factory shrink wrap, blue protective metal film, and foam edge padding remain undisturbed on the original pallets inside the Mill City crates, verified visually at delivery.
The unit has remained bolted on its original shipping pallets since delivery. No equipment has been lifted out of its crating, plumbed to gas, vented, or electrically wired.
Zero burner ignitions, zero thermal cycles, and zero coffee contact. Preserved indoors in original unused condition awaiting buyer inspection and setup.
Delivery Visual Verification · Crate 1 (1 of 3)
Per carrier freight receiving instructions, two of the three crates (including Crate 1 shown here) had an exterior wood panel opened upon taking delivery strictly to visually inspect the cargo for transit damage.
As photographed above, the roaster body remained completely wrapped from top to bottom in its original Mill City factory shrink film, blue stainless protective sheeting, and foam padding, and was never unbolted, lifted, or disturbed from its pallet. Immediately after visual verification, the crate panels were re-secured closed with screws and stored indoors.
All three original timber crates (1-3, 2-3, and 3-3) remain stored indoors on their Mill City pallets with factory placards, March 27, 2025 packing slips, and Crate 1’s untripped SpotSee ShockWatch monitor intact; the two crates opened for receiving inspection were re-secured with screws with cargo completely undisturbed. Offered for sale on behalf of Church of The Lamb in Penn Laird, Virginia (authorized representative: Mike Cirigliano). To prevent listing fraud, the serial number is withheld publicly, has been physically verified, and is provided directly alongside original paperwork during buyer due diligence.
Ships insured for full value in three original crates totaling 2,050 lb (1,369 lb roaster body, 403 lb cooling tray, 278 lb chaff collector). Seller covers LTL freight up to 750 road miles from Penn Laird, VA; buyers beyond 750 miles pay the freight difference. Buyer provides dock/forklift or covers liftgate/residential surcharges; local pickup welcome. Wire transfer or verified escrow only (no checks); 14-day hold on deposit; buyer counts crates and notes any transit issues on the Bill of Lading (BOL) prior to signing.
Buyer Due Diligence
The machine is offered for sale on behalf of Church of The Lamb in Penn Laird, Virginia following a change in roastery plans. It is priced at $32,000 with free LTL freight up to 750 miles—$15,000 (~32%) below Mill City Roasters’ published $47,000 list price for a new M-Series 10 kg—and is ready for immediate release.
Yes. At delivery, two of the three crates (including Crate 1) had an access panel opened solely for visual receiving inspection—verifying intact factory shrink wrap and zero transit damage without moving the equipment—and were immediately re-secured with screws. Qualified buyers or their equipment technicians may schedule an in-person inspection in Penn Laird, Virginia, or request a live unedited video walkaround covering all three crates (1-3, 2-3, 3-3), factory wrap, and manufacturer nameplate verification.
Yes. The serial number is physically verified and shared privately with serious buyers. Please note that standard Mill City factory warranties apply only to the original purchaser and do not transfer; however, Mill City Roasters continues offering replacement parts, consumables, venting kits, and paid hourly Priority Support for Legacy owners.
No. The roaster has never been installed, connected to gas or power, or fired, and carries zero roast hours. The March 27, 2025 packing slip verifies Propane (LP) setup via Install Kit GRC-10-LP and Quick Connect Kit VK-10-S (Layout S) with precut galvanized pipe (4QF × 42 and 5QF × 34). Buyers should confirm exact gas BTU, electrical circuit, and exhaust specifications with a licensed contractor and Mill City’s serial-matched manual prior to installation.
Yes. Seller pays insured LTL freight up to 750 miles from Penn Laird, VA (contiguous U.S.) in three factory crates totaling 2,050 lb (1,369 lb, 403 lb, and 278 lb). Buyers beyond 750 miles pay only the freight difference. The receiving site requires a dock or forklift (or buyer covers liftgate/residential surcharges). Delivery timing is subject to seasonal freight scheduling, and local Virginia pickup is welcome by appointment.
Accepted settlement methods are domestic bank wire transfer or verified commercial equipment escrow only (no checks). A deposit holds the machine for 14 days while freight and build-out details are finalized, with full balance clearing prior to pickup or dispatch. On delivery, count all 3 crates and inspect the Bill of Lading before signing.
Direct Inquiry
Reach out directly to schedule an in-person Virginia inspection, request a live video walkaround, or receive the verified serial number and freight dimensions.
Helpful details to include:
Your inquiry details have been validated. Open your email client below to transmit directly to sales@millcity10kg.com, or copy the formatted summary.